All mirrors online | Library checked 6 hours ago | 249 titles indexed | 131.5M total downloads served
T trpger.us
Home / All software / System & Drivers / AIDA64 All Editions
FinalWire, System & Drivers

AIDA64 All Editions

Pre-ActivatedMultilingualToolkitVersion 8.35.840032-bit and 64-bit

Deep hardware identification, sensor monitoring and stability testing in one package, reporting what is actually inside a machine down to the component level and then proving whether it holds up under load.

Version
8.35.8400
Package size
118 MB
Downloads
110,904
Licensing
Pre-activated
Architecture
32-bit and 64-bit
Updated
4 days ago
Rating
4.8 / 5
Votes
22,590

About this release

AIDA64 tells you what is actually in a machine. Not the marketing name on the box, the real components, the specific memory modules with their timings and manufacturer, the exact storage controller, the graphics chip revision, the motherboard chipset, the firmware version, the installed drivers and the state of every one of them. On a machine you did not build, or one that was sold to you with a vague specification, that information is worth having and is remarkably hard to get any other way.

The sensor side reads every temperature, voltage, fan speed, clock rate and power figure the hardware exposes, and logs them over time to a file you can look at afterwards. That is how you find the intermittent problem, the thermal throttle that only happens under sustained load, the fan that spins up ten degrees later than it should, the power delivery sagging on one rail. Readings can be pushed to an external display, a secondary screen or a hardware panel for permanent monitoring.

The stability testing and benchmarking round it out. The stress test loads the processor, the memory, the cache, the storage and the graphics independently or all at once, and reports the moment anything reports an error or throttles. The benchmark set covers memory bandwidth and latency, processor throughput across several workload types, and disk performance, with a comparison list so a number means something. The package covers all four editions in one download, including the network audit tools for reporting across a fleet of machines.

What it does

  • Component level hardware identification down to module and revision detail
  • Complete driver and firmware inventory with version reporting
  • Sensor monitoring for temperature, voltage, fan speed, clocks and power
  • Logging of sensor readings over time to a file for later analysis
  • Output of readings to a secondary display or external hardware panel
  • Stress testing of processor, memory, cache, storage and graphics
  • Benchmark suite for memory bandwidth, latency, processor and disk
  • Software inventory including installed applications and licences
  • Network audit tools for reporting across a fleet of machines
  • All four editions included in one package

Changes in this version

  • Support for the current generation of processors and chipsets
  • Additional sensor definitions for recent motherboard models
  • Improved graphics identification on the newest cards
  • Reworked report export with cleaner formatting
  • Reduced overhead while sensor logging runs continuously

What the package contains

  • AIDA64 package covering all four editions
  • Complete hardware and sensor definition database
  • Benchmark and stress testing modules
  • Network audit components
  • Readme with the install order written out step by step

Installation notes

Follow these in order. Most reports of a failed install come from skipping a step rather than from the package itself.

  1. Disconnect from the network before you start.
  2. Extract the archive to any folder, the package is small.
  3. Run the installer as administrator, or use the portable build directly.
  4. Apply the included activation step before first launch.
  5. Open it once and let the hardware detection pass complete.
  6. Reconnect to the network.

System requirements

Operating systemWindows 7 or newer, 32-bit or 64-bit
ProcessorAny processor, detection is more detailed on current hardware
Memory1 GB minimum
GraphicsNo requirement for reporting, needed for graphics stress testing
Storage200 MB free
PermissionsAdministrator rights required for sensor access

Things worth knowing

  • Sensor access needs administrator rights, without them most readings simply do not appear.
  • Run the stress test with adequate cooling and supervision, it will push hardware to its actual limit and is meant to.
  • Some sensor readings depend on the motherboard exposing them, a missing value is usually the hardware rather than the software.

Questions about this title

Why are some sensors missing?
The motherboard only exposes what it exposes. If a value is not there, the hardware is not reporting it, and no software can invent it.
Is the stress test safe?
It loads hardware to its limit deliberately, which is the point. On a properly cooled machine it is fine. On a machine with a cooling problem it will find it, loudly.
Can it monitor without the window open?
Yes, readings can be logged to a file, sent to a secondary display, or pushed to an external hardware panel.
What is the difference between the editions?
Mostly the audit and reporting scope for managing many machines. The hardware detection and monitoring core is the same throughout.

What people are saying

Listing information

This entry is catalogued under System & Drivers and carries the tags below. Language coverage is Multilingual, 40 interface languages, and the supported platform list is Windows 7, Windows 8.1, Windows 10, Windows 11. Version 8.35.8400 is the current catalogued build, last checked 4 days ago, and the entry has been in the index since it was added 3 years ago.